My Router cisco 7200 series is haveing problem. When i finish the config on the g0/1 service as my Outside interface with a public Ip address and g0/2 ad inside with a private Ip, the router hangs and I change the g0/2 to g0/3 and it's still the same problem. when pinging it will reply while loading the IOS file but immediately it finish loading it will time out. Please Help me give a lasting solution to this. Thank You
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...