Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

ar
New Member

7200 NPE-G1 GE interface and 7600 SIP-600 LLQ Wierd Problem

Hi Guys.

I  am trying to attach an LLQ policy to my 7200/7600 WAN Gigabit Ethernet  sub-interface. I cant seem to attach the policy and giving me an error.For 7200, Im using NPE-G1  GE interface:

Im getting the error below:

(config-subif)#service-policy output  8M
user-defined classes with queueing features are not allowed in a service-policy at sub-interface/pvc
in conjunction with session based queueing policy


policy-map 8M
  class class-default
    shape average 8000000
   service-policy QOS

policy-map QOS
  class VOICE
    priority percent 60
  class  NET-MGMT
    bandwidth remaining percent 5
  class MISSION-CRITICAL
    bandwidth remaining percent 20

But I can apply that same policy on the same interface (just different sub-interface).

For 7600 SIP-600 GE Sub-interface:

Im getting an error of:

(config-subif)#service-policy output 8M
Police and strict priority must be configured together for egress QOS.
Invalid feature combination for the class VOICE
Configuration failed!

But I can  attach this policy into other  sub-interface on the same physical interface.

Anyone encountered the same problem?

Thanks

2 REPLIES
ar
New Member

7200 NPE-G1 GE interface and 7600 SIP-600 LLQ Wierd Problem

I tried doing tests again...

I tried shutting down interface first...still the same.

I created new sub-interfaces and apply this new policy, and its good....

Actually one old same policy, just different shape rate is applied to one sub-interface and is working years now...

Applying this old policy to this specific sub-interface dont really works...Im getting the message above....

Need your comments guys....

thanks

ar
New Member

7200 NPE-G1 GE interface and 7600 SIP-600 LLQ Wierd Problem

Remaining problem as of the moment is on the 7200.

After applying a new policy to one interface facing LAC, im getting the error below:

(config-subif)#service-policy output LNS-LAC

user-defined classes with queueing features are not allowed in a service-policy at sub-interface/pvc

in conjunction with session based queueing policy

7200 is running as LNS/L2TP. And Im trying to apply egress QOS on interface facing the LAC.

313
Views
0
Helpful
2
Replies