Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7200 to ASR migration - configurations not taking

Hi,

Migrating some configurations from a 7200 to an ASR, although it appears the following commands are not present.

Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.1(3)S2, RELEASE SOFTWARE (fc1)

Any ideas on what commands may have replaced these or if I am missing something here?

interface Serial0/2/0:0

dialer rotary-group 1

dialer-group 1

isdn switch-type primary-net5

interface Serial0/2/1:0

dialer rotary-group 1

dialer-group 1

isdn switch-type primary-net5

  • WAN Routing and Switching
4 REPLIES
Hall of Fame Super Gold

Re: 7200 to ASR migration - configurations not taking

Are you trying to use ASR for ISDN? That doesn not seem the best application for a multi-gigabit router.

New Member

Re: 7200 to ASR migration - configurations not taking

It is required in the interim to support existing legacy infrastructure.

Cisco Employee

Re: 7200 to ASR migration - configurations not taking

Hello Edward,

I believe ISDN PRI is not supported on ASR1K. A limited ISDN functionality has been ported to 15.3(1)S throttle, so I would suggest you to upgrade the IOS and verify the behavior.

Please, take a look at feature guide below:

http://www.cisco.com/en/US/docs/ios-xml/ios/vpdn/configuration/xe-3s/asr1000/vpd-isdn-access-bba.html

-- 
Best regards,
Dmitry Skotnikov

-- Best regards, Dmitry Skotnikov
New Member

Re: 7200 to ASR migration - configurations not taking

Thanks Dmytro, I will look into this.

189
Views
4
Helpful
4
Replies
This widget could not be displayed.