Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

7206 ECC Error Message

Hey guys,

Anyone ever seen this error?? I google'd it but couldn't find anything.

"Corrected ECC from L2 cache or memory"

-Lloyd

1 REPLY

Re: 7206 ECC Error Message

Hi

hope this helps..

Error Message

%BCM-4-ECC_L2CACHE : Corrected ECC from L2 cache

Explanation A soft-parity error from the Layer 2 cache has been detected and corrected. Normal system operation should continue.

Recommended Action If there is a regular or sustained occurrence of this message, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.

Error Message

%BCM-4-ECC_MEMORY : Corrected ECC from memory

Explanation A soft-parity error from the memory has been detected and corrected. Normal system operation should continue.

Recommended Action If there is a regular or sustained occurrence of this message, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs

for more info do refer this link..

http://www.cisco.com/en/US/products/sw/iosswrel/ps1829/products_system_message_guide_chapter09186a00801eb2bc.html#wp771222

regds

2223
Views
0
Helpful
1
Replies
CreatePlease to create content