Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7206 NPE-G2 filesystem Class

Anybody know what "class" file system the 7206VXR NPE-G2 uses? I was unable to read flash from a NPE-G1 and vice versa. The compatability matrix lists the NPE as a class c, but I am thinking the NPE-G2 is something else...

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: 7206 NPE-G2 filesystem Class

Hello Ryan,

I recommend to have the NPE-G2 to format the flash and to write the ios image on it.

We had a problem once caused by this kind of things: a GSR router in reloading an ios image it had already loaded other times complained of something.

The ios image had been written in another device, same file system type.

So if possible the safe way is to do all on the target device.

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: 7206 NPE-G2 filesystem Class

Hello Ryan,

I recommend to have the NPE-G2 to format the flash and to write the ios image on it.

We had a problem once caused by this kind of things: a GSR router in reloading an ios image it had already loaded other times complained of something.

The ios image had been written in another device, same file system type.

So if possible the safe way is to do all on the target device.

Hope to help

Giuseppe

New Member

Re: 7206 NPE-G2 filesystem Class

Thanks Guiseppe,

This is the same issue we had, where IOS had been written on another device of seemingly the same file system.

130
Views
0
Helpful
2
Replies