Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

7206 router ATM DS3 (PA-A6-T3) Problem

Hi all,

We have a 7206 router with ATM DS3 card (PA-A6-T3) inserted in in it. The ATM PVC interface was down:

AT3/0           up      up  

AT3/0.101          down     down 

I tried to shut & unshut the interface:

7206(config)#int ATM3/0

7206(config-if)#shut

7206(config-if)#exit

7206(config)#

But as soon as I shut the port there were these logs:

May 5 20:02:57 GMT: %PA-3-DEACTIVATED: port adapter in bay [3] powered off.

May 5 20:02:57 GMT: %ENTITY_ALARM-6-INFO: ASSERT CRITICAL PA Slot 3 Active Card Removed OIR Alarm

May 5 20:02:57 GMT: %ATMPA-3-INITFAIL: ATMPA (bay 3), Init Failed at ../pas/if_pas_atmdx.c - line 3863 -Process= "Virtual Exec", ipl= 0, pid= 244 -Traceback= 0x61335CC0 0x601D31A4 0x601D331C 0x601E54DC 0x601C885C 0x601C9844 0x601DA930 0x6033B0F0 0x6033AB5C 0x60332FEC 0x61379264 0x61397DE0 0x6266B460 0x6266B444

May 5 20:02:58 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM3/0, changed state to down

Now I am no more seeing that ATM card in "Sh ip int brief" & "sh inv". Not able to get into that interface configuration mode. Anybody can help me out please?

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

7206 router ATM DS3 (PA-A6-T3) Problem

May be...

- bug in IOS

- hardware failure

- you do not have enough points to use high-speed ATM interface

- something else...

What does your router say in sh ver and sh inventory after rebooting?

4 REPLIES
Bronze

7206 router ATM DS3 (PA-A6-T3) Problem

May be...

- bug in IOS

- hardware failure

- you do not have enough points to use high-speed ATM interface

- something else...

What does your router say in sh ver and sh inventory after rebooting?

New Member

7206 router ATM DS3 (PA-A6-T3) Problem

Hi Sergey Fer,

I did not get permission to reboot the router. Need to get a downtime window.

Will reboot & paste the logs here.

Thanks a lot for your help.

Bronze

7206 router ATM DS3 (PA-A6-T3) Problem

Not at all

While waiting for your maintenace time-slot could you send your current show version and show inventory?

New Member

7206 router ATM DS3 (PA-A6-T3) Problem

The link came up after we pulled out the card & reseated it.

Thanks for all your suggestion.

797
Views
0
Helpful
4
Replies
CreatePlease to create content