Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

7206 VXR boot up problem

Thre is a problem when booting up 7206 VXR router. Below is the log

System Bootstrap, Version 12.1(20000710:044039) [nlaw-121E_npeb 117], DEVELOPMEN

T SOFTWARE

Copyright (c) 1994-2000 by cisco Systems, Inc.

C7200 platform with 524288 Kbytes of main memory

The fans works fine and I am able to enter the rommon mode...

3 REPLIES

Re: 7206 VXR boot up problem

hi

I feel we need more info on the same to help u out.

Is the booting hangs up after displaying this ? or is it proceeding further ?

Is it possible for you to post out a fresh log capturing the whole process from the power on to the hanging stage ?

also do you have any other IOS saved in the box ? if yes have you tried booting with the other ios code ??

regds

Community Member

Re: 7206 VXR boot up problem

Hi. Thank you for your reply.

The router stops after those 3 lines when booting up. There is only one IOS inside of it. The IO light on the front of the box is orange...

Community Member

Re: 7206 VXR boot up problem

· I/O controller: Provides the console connection, the auxiliary connection, the NVRAM, the Boot ROM, the Boot FLASH, and the built-in interface controller (either an Ethernet or Fast Ethernet interface). The I/O controller also provides access to the Flash memory cards in the PCMCIA card slot through PCI bus 0.

Source: http://www.cisco.com/en/US/products/hw/routers/ps341/products_tech_note09186a008009446a.shtml#identify

The most probable answer is stated above, as the router seem cannot load the software from the flash...

But im not sure what to do next..

162
Views
0
Helpful
3
Replies
CreatePlease to create content