Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7206 VXR NPE-G2

Hi,

can i know whether 7206 VXR NPE-G2 rputer is hot swappable because we are having 2 7206 router which is having additional card inserted and we need to remove from one router and to place on the other router

can i do we its in live ?

Slot 1:

Gigabit Ethernet Port adapter, 1 port

Port adapter is analyzed

Port adapter insertion time 28w4d ago

EEPROM contents at hardware discovery:

Hardware revision 1.1 Board revision B0

Serial number 27704720 Part number 73-3144-05

FRU Part Number PA-GE=

Test history 0x0 RMA number 00-00-00

EEPROM format version 1

EEPROM contents (hex):

0x00: 01 98 01 01 01 A6 BD 90 49 0C 48 05 00 00 00 00

0x10: 58 00 00 00 00 00 00 00 00 01 FF FF FF FF FF FF

0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x30: FF FF FF FF FF FF FF FF FF FF FF FF

Slot 2:

Gigabit Ethernet Port adapter, 1 port

Port adapter is analyzed

Port adapter insertion time 28w4d ago

EEPROM contents at hardware discovery:

Hardware revision 1.1 Board revision B0

Serial number 27185976 Part number 73-3144-05

FRU Part Number PA-GE=

Test history 0x0 RMA number 00-00-00

EEPROM format version 1

EEPROM contents (hex):

0x00: 01 98 01 01 01 9E D3 38 49 0C 48 05 00 00 00 00

0x10: 58 00 00 00 00 00 00 00 00 01 FF FF FF FF FF FF

0x20: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

0x30: FF FF FF FF FF FF FF FF FF FF FF FF

1 REPLY
Silver

Re: 7206 VXR NPE-G2

According the documentation on CCO, it looks like "all port adapters and service adapters in the Cisco 7200 VXR routers support online insertion and removal (OIR). However, it is wise to shut down the interface before removing a port adapter that has active traffic moving through it. Removing a port adapter while traffic is flowing through the ports can cause system disruption. Once the port adapter is inserted, the ports can be brought back up."

Here is the URL for more details.

http://www.cisco.com/en/US/docs/routers/7200/install_and_upgrade/7200vxr_install_config/5013ov.html#wp1016065

579
Views
0
Helpful
1
Replies