Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

7206 will not recognize PA-A3-8T1Ima card

switched slots, rebooted, reseated card..nothing I can not get it to recognize the card..any ideas?

appreciate the help

6 REPLIES
Hall of Fame Super Silver

Re: 7206 will not recognize PA-A3-8T1Ima card

Hello Jay,

you may need a different IOS image

you can check this using Feature Navigator

www.cisco.com/go/fn

or you can post a sh ver here

Hope to help

Giuseppe

Community Member

Re: 7206 will not recognize PA-A3-8T1Ima card

Here is the Sh ver

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(20), RELEASE SOFTWARE (fc2)

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Thu 29-May-03 20:10 by kellythw

Image text-base: 0x60008950, data-base: 0x61562000

ROM: System Bootstrap, Version 11.1(13)CA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOOTLDR: 7200 Software (C7200-BOOT-M), Version 11.3(2)AA, EARLY DEPLOYMENT, RELEASE SOFTWARE (fc1)

udlext-r-001 uptime is 1 hour, 5 minutes

System returned to ROM by power-on

System image file is "slot0:c7200-is-mz.121-20.bin"

cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.

Processor board ID 8770200

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

6 slot midplane, Version 1.3

appreciate the help!!!

Hall of Fame Super Silver

Re: 7206 will not recognize PA-A3-8T1Ima card

Hello Jay,

I've used the sofware advisor tool in the hope of finding a suitable release for your device.

it provided the following feedback

Two or more selected items are incompatible. Selected item [PA-A3-8T1IMA=] is incompatible with: [NPE-200=-TS]. Please change one or more items.

So it looks like there is an hardware incompatibility

Hope to help

Giuseppe

Community Member

Re: 7206 will not recognize PA-A3-8T1Ima card

interesting..so the card is not compatable with the router hardware?

it was taken from one 7200 and put into another..will check to see what is was removed from..really appreciate the help..

Community Member

Re: 7206 will not recognize PA-A3-8T1Ima card

is it compatable with the following

NPE400

C7200-I/O-GE+E=

CLEI : CN3I3KOAAE

SPECIAL : 800-06117-08

Serial : 34676882

Hall of Fame Super Silver

Re: 7206 will not recognize PA-A3-8T1Ima card

Hello Jay,

the incompatibility declared from the tool was with the NPE-200 not with the specified I/O controller.

for the tool with a C7206 chassis this I/O controller cannot be installed.

Be aware that both NPE-200 and C7206 chassis are end of sale since 2004 or before.

You may have taken the card from a C7206VXR chassis with NPE 400 or better processor.

you can check this using

sh c7200

Hope to help

Giuseppe

132
Views
0
Helpful
6
Replies
CreatePlease to create content