Recently i bought a 7206VXR with NPE-G1 , I found the 7206VXR only have boot image on the router ,so i delete origin boot image then download "c7200-is-mz.121-27b.bin" , finally the router directly run into romon , I have some question
1. there is must , I need have boot image exit the router
2. what a IOS image , that contain boot image & software feature image
3. Because the router only 16M bootflash , then no other external flash , which method is fit for my router
Unlike smaller routers that have the bootflash in a chip these larger routers have it in a file. If you delete it and you delete the main ios you have a dead router. Your only option is to boot the router from a external flash card and then copy it back to the bootflash. If you do not have a external card with the image on it you are in big trouble.
The official method is to copy the image to a flash card with another router. I think these newer 7200 use standard file systems so you should be able to copy the image to the compact flash with a PC and then boot it in the router.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.