Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

7301 Router %Error in authentication

When I try and go into enable mode I enter the password and I get %Error in authentication. Any thoughts? I was in the router eailier and used the same password as I am now and it worked no problem.

Mike

4 REPLIES

Re: 7301 Router %Error in authentication

You may have to reset it. What was the last thing you did it it, and are you consoled or terminaled into it?

John

HTH, John *** Please rate all useful posts ***

Re: 7301 Router %Error in authentication

Oh, and I meant reset the password on the router if you can't get into it.

HTH, John *** Please rate all useful posts ***

Re: 7301 Router %Error in authentication

I tried both telnet and console both with the same results. The last thing I did was to show int and show run....I did not change or save anything.

Mike

Re: 7301 Router %Error in authentication

That's weird. You may have to reset the password through a console connection.

Here's a link:

http://www.cisco.com/en/US/docs/routers/7300/install_and_upgrade/7301/7301_install_and_config_guide/5418c.html#wp1128746

--John

HTH, John *** Please rate all useful posts ***
314
Views
0
Helpful
4
Replies