hello everyone, i just receive a 7507 with a RSP8 in slot 2 or 3 and a VIP. I turned on and the Normal Led in the RSP is on but the Led at the front pannel isnt.I waited a long time, but the enable VIP LED didnt turned ON, I tried to connect to console and Aux port but didnt show anything, not a banner, not a sign of live! the CPU hault is OFF, and the two LED in the RSP of SLAVE and MASTER are ON. The LEDs of Slot 0 and 1 are off. (flash in Slot 0)I changed, and almost re-assembled the cards, even the power supply I've changed all the hyperterminal settings, the console cable, the adapters and the terminal. Should i suspect the RSP is damaged or something? The equipment is a re-sale. Please help me. Thanks a lot
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...