Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7600 module restart

Dear All,

    i have 7600 , module 1 is restarted and crash file created.

1 REPLY
Hall of Fame Super Silver

Re: 7600 module restart

Hello Ibrahim,

from attached crashinfo:

SLOT 1: 00:00:05: %SYS-5-RESTART: System restarted --

Cisco IOS Software, cwlc Software (sip1-DW-M), Version 12.2(33)SRA7, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2008 by Cisco Systems, Inc.

Compiled Wed 05-Mar-08 17:57 by prod_rel_team

SLOT 1: 00:00:05: %SCP-5-ONLINE: Module online

SLOT 1: Aug 21 01:47:27 EGT: %SIPSPA-6-OIR: Bay 0 SPA Power changed to On

SLOT 1: Aug 21 01:47:27 EGT: %SIPSPA-6-OIR: Bay 1 SPA Power changed to On

SLOT 1: Aug 21 01:47:28 EGT: %SIPSPA-6-OIR: Bay 0 SPA OK changed to On

SLOT 1: Aug 21 01:47:28 EGT: %SIPSPA-6-OIR: Bay 1 SPA OK changed to On

SLOT 1: Aug 21 01:47:36 EGT: %SPA_PLUGIN-6-FIRMWARE_DOWNLOADING: SPA-8XCHT1/E1[1/0]: Downloading SPA firmware (bundled)...

SLOT 1: Aug 21 01:47:37 EGT: %SPA_PLUGIN-6-FIRMWARE_DOWNLOADING: SPA-8XCHT1/E1[1/1]: Downloading SPA firmware (bundled)...

SLOT 1: Aug 21 01:47:40 EGT: %SPA_PLUGIN-6-FIRMWARE_APPS_DOWNLOADING: SPA-8XCHT1/E1[1/0]: Downloading SPA firmware application (bundled)...

SLOT 1: Aug 21 01:47:40 EGT: %SPA_PLUGIN-6-FIRMWARE_APPS_DOWNLOADING: SPA-8XCHT1/E1[1/1]: Downloading SPA firmware application (bundled)...

%ALIGN-1-FATAL: Illegal access to a low address 23:06:46 EGT Sun Oct 4 2009

addr=0x144, pc=0x4088C7C4, ra=0x4088C618, sp=0x43A65968

%ALIGN-1-FATAL: Illegal access to a low address 23:06:46 EGT Sun Oct 4 2009

addr=0x144, pc=0x4088C7C4, ra=0x4088C618, sp=0x43A65968

Possible software fault. Upon reccurence, please collect

crashinfo, "show tech" and contact Cisco Technical Support.

The SIP linecard in slot1 had a SW crash on the 8xE1 SPA

I will look at third attachment to find out your IOS image.

Edit:

so you have 12.2(33)SRA7 and the SIP is a SIP200.

looking at release notes for your image is the next step

Edit2:

there are some bugs about Sip200 or SPA 8 E1

example:

CSCsj34043

this is similar but applies to OC-3 SPA + sip200

Hope to help

Giuseppe

297
Views
0
Helpful
1
Replies