7600 SUP-720 3bxl

[anasubra_2]

Hi All,

Trying to find a comparison between an Juniper M series router and the cisco 7600 router with sup-720 3bxl.In relation to that, would like to see a link which would provide the below details.

7600 Sup-720-3bxl(1 gb DRAM,512mb flash)

Maximum bgp instances ?

Maximum BGP peers ?

Maximum OSPF instances ?

Maximum OSPF routes ?

Maximum static routes ?

Meantime between failures(Bellcore Model) ?

If you could refer to any official cisco link,which could provide the above info would be great.

Any help is really appreciated.

Regards

Anantha Subramanian Natarajan

[Giuseppe Larosa]

Hello Anantha,

see

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_data_sheet09186a0080159856.html

be aware that there is also RSP 720 processor for the c7600 platform that is more powerful in routing and MPLS

http://www.cisco.com/en/US/prod/collateral/routers/ps368/product_data_sheet0900aecd8057f3b6.html

for chassis there is the C7609-S chassis

http://www.cisco.com/en/US/prod/collateral/routers/ps368/ps367/product_data_sheet0900aecd8057f3d2.html

Hope to help

Giuseppe

[anasubra_2]

Hi Giuseppe,

Thank you very much for the above details and its very useful.

I am not able to find these below specifics

Maximum bgp instances ?

Maximum BGP peers ?

Maximum OSPF instances ?

Maximum OSPF routes ?

Maximum static routes ?

Meantime between failures(Bellcore Model) ?

Is it possible to find these values for sup-720-3bxl and as well as RSP720-3c-xl.

Once again,thank you

Regards

Anantha Subramanain Natarajan

[Giuseppe Larosa]

Hello Anantha,

these are performance data in detail.

max bgp instance ?

1 you can have only one process but this comes from the protocol

max bgp peers ?

500 for sure, may be 1000 if not using aggressive timers.

max OSPF instances ?

32 but there is a feature for OSPF instances in VRF that goes beyond this

max OSPF routes ?

the limits are those of the protocol:

you shouldn't go over 5000-10000 routes in a single instance

max static routes ?

I don't know

Meantime between failures(Bellcore Model) ?

I don't know

Hope to help

Giuseppe

[anasubra_2]

Hi Giuseppe,

Thank you very much . Do you know any cisco official link with the above details mentioned.

Thanks

Regards

Anantha Subramanian Natarajan