Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

7606 Fiber connection question

Hello

I have a Fiber link in place and would like to plug in 2 7606 routers on either end on this link.

Does the 7606 have the capability to connect to FX? If not, can I insert a PA with Fiber connectors (like an OC1)?

Thanks

wvw

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: 7606 Fiber connection question

You sure can. You can either use GLC-FE-100FX or GLC-FE-100LX.

Here's the link of supported SFP modules (FastEthernet and GigEthernet) for the 7600 routers:

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1270293

Hope this helps you.

7 REPLIES
Hall of Fame Super Gold

Re: 7606 Fiber connection question

Yes, you have all types of fiber interfaces on the 7600 routers, including 10 gigabits. What you choose depends by your fiber plant, and budget.

New Member

Re: 7606 Fiber connection question

We are looking at a fiber link with an LC connector which in turn has to plug into the 7606 router. Any suggestions?

Silver

Re: 7606 Fiber connection question

We are looking at a fiber link with an LC connector which in turn has to plug into the 7606 router

I think more than LC connector you should provide info what speed you are looking for and what is the distance between 2 routers?

LC is just the connector even if the card for the speed and distance dont have LC connector. you can buy a cable which will convert to LC connector at the end.

Hall of Fame Super Gold

Re: 7606 Fiber connection question

Please specify fiber type and length of span.

Re: 7606 Fiber connection question

-

Hall of Fame Super Gold

Re: 7606 Fiber connection question

You sure can. You can either use GLC-FE-100FX or GLC-FE-100LX.

Here's the link of supported SFP modules (FastEthernet and GigEthernet) for the 7600 routers:

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1270293

Hope this helps you.

Hall of Fame Super Gold

Re: 7606 Fiber connection question

Thanks for the rating.

123
Views
0
Helpful
7
Replies