07-10-2008 12:48 AM - edited 03-03-2019 10:40 PM
I have cisco 7609 router with sup 720 3cxl(RSP720-3CXL-GE).
I need to check the memory on sup & no. of routes 720 will hold.
Regards,
07-10-2008 01:01 AM
sh mls cef maximum-routes
sh ver
sh mem
07-11-2008 12:37 AM
Hi,
Thanks for providing the commands.
I got the commands to change the max routes for protocol.
mls cef maximum-routes ip 100.
I have one more query.If i allocate all routes Max to IP protocol & i am going to use for only to hold BGP Routes.
Is there any issue if i allocate Maximum to IP protocol.Below is the output after i allocate max to IP protocol.
Router#sh mls cef maximum-routes
FIB TCAM maximum routes :
=======================
Current :-
-------
IPv4 - 1007k
MPLS - 1k (default)
IPv6 + IP Multicast - 8k (default)
Regards,
07-11-2008 01:21 AM
I advise you to stay it as it is.
it's enough for holding BGP Routes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide