Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

7613 atm card failure

Hi

I have a 7613 router with image "c7600rsp72043-adventerprisek9-mz.122-33.SRD2.bin" but my router cannot enable my SPA-4XOC3-ATM. I am getting this message "SPA-4XOC3-ATM card in subslot 1/0 is being disabled because of an incompatible FPD

image version. Note that the c7600-fpd-pkg.122-33.SRD2.pkg package will be required if you want to perform the upgrade operation". My problem here is how do I check the version before downloading the ios required? this is a new router and the ios that is on this router is the latest IOS.

  • WAN Routing and Switching
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: 7613 atm card failure

Hello Mpho,

my understanding is that the device is asking you to upgrade the firmware (FPD) of the SPA using the specified file:

c7600-fpd-pkg.122-33.SRD2.pkg

So you should download this file that is not an ios image from cisco site and you should put it on the flash.

Hope to help

Giuseppe

1 REPLY
Hall of Fame Super Silver

Re: 7613 atm card failure

Hello Mpho,

my understanding is that the device is asking you to upgrade the firmware (FPD) of the SPA using the specified file:

c7600-fpd-pkg.122-33.SRD2.pkg

So you should download this file that is not an ios image from cisco site and you should put it on the flash.

Hope to help

Giuseppe

121
Views
0
Helpful
1
Replies