Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

857 Trouble

New installed 857 in the branch office; I have some trouble:

1) I have a VPN to a PIX-506 in the main site; VPN is UP, from the branch I can connect to the server in the Main site (alle services). From the central site I can only ping the PC's in the branch, but I can not connect via RDP (port 3389), while all ports seam to be open - NO FireWall function activated on the Router.

2) I am not able to manage the router from remote - how to configure ?

Attached:

MAIN PIX: PIX-TN_051213.txt

Remote Router: Rt-CUrov_051213.txt

Show Version: ShVer.txt

Best Regards

1 REPLY
VIP Purple

Re: 857 Trouble

Hello,

your PIX configuration looks ok. Can you try and add the following command to your remote router:

ip nat inside source static tcp X.X.X.X 88.32.72.202 3389 extendable

where X.X.X.X is the IP address of one of your PCs ?

And then try to connect through RDP again (to that specific PC) ?

Regards,

GP

84
Views
0
Helpful
1
Replies