Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

871 Site to Site VPN - Connection but no ping.

Hello,

I'm new in working with Cisco routers. Any help would be appreciated in this.

I'm trying to setup a site to site VPN. I have an 871 router on one end and a BEFSX41 by Linksys on the other end. I've been able to setup VPN's with the linksys router before with a Netopia. I've setup the VPN and a connection is made between the two routers and established. Once the connection is made I'm not able to ping from either end of the VPN either from the router or from a computer inside the router. The VPN Server was setup using SDM and using the wizard. The Linksys IPSEC configuration is setup with the ip address of 192.168.1.1 with a subnet of 255.255.255.0. The Cisco IPSEC configuration is setup for with the address of 10.38.0.1 with a subnet of 255.255.255.0. The IKE phases I and phase II are all working and connecting. I'm not able to ping, telnet, or anything across the network. I'm not able to get across the VPN tunnel. Any ideas?

Thanks.

Kevin

1 REPLY
New Member

Re: 871 Site to Site VPN - Connection but no ping.

Fix this problem. Thanks.

262
Views
0
Helpful
1
Replies
CreatePlease to create content