I have recently switched out my Cisco 678 here for a Cisco 877 and am trying to get it working on my ADSL link. I have configured the 877 with the PPPoA username and password and static IP, but the PPP light never comes on. (CD light is solid on and DSL line is trained)
The tech at the ISP told me that my router is constantly logging on (successfully, he states) but I never get a PPP light and the link never comes up.
The modem is running Advanced IP Services IOS 12.4(15)T1 and DSL FW 3.0.14.
I did some more research and debugging and it looks like my authentication is failing, but I am assured by the ISP that I am using the correct username and password. In fact, when I plug the 678 in using that User/pass combo, I get a good negotiation and the circuit comes all the way up.
Here is the debug output:
*Dec 19 04:43:57.475: Vi2 PPP: Phase is ESTABLISHING, Passive Open
*Dec 19 04:43:57.475: Vi2 LCP: State is Listen
*Dec 19 04:43:58.299: Vi2 LCP: I CONFREQ [Listen] id 2 len 14
*Dec 19 04:43:58.299: Vi2 LCP: AuthProto PAP (0x0304C023)
*Dec 19 04:43:59.419: Vi2 LCP: Dropping packet, state is TERMsent
*Dec 19 04:44:00.387: Vi2 LCP: Timeout: State TERMsent
*Dec 19 04:44:00.387: Vi2 LCP: State is Closed
*Dec 19 04:44:00.387: Vi2 PPP: Phase is DOWN
It appears that when I send my username, the device on the other side prompts me "Username: ", suggesting that I have given an incorrect logon name.
Has anyone seen this before? I am trying to get details about the device on the other side of the link, but it's difficult to get ISP techs to tell me exactly what hardware they have.
Any help anyone can offer would be great.
I've already tried switching between dsl operating-mode auto and ansi-dmt with no change. I also have removed the CHAP authentication from the Dialer0 interface since I verified that the ISP was using PAP.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.