Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

887 VAG losing power to Cell radio

We have 300+ 887VAG and VAMG routers out in the field running DSL and 3G.

They all work fine on Day 1, but after a while (we don't know how long) the cellular interface goes into the following state.

A shut/no shut of the controller or the interfaces does nothing.

A reboot sometimes gets it back.

What is causing the Out of oper voltage range error?????

R01#sh cell 0 radio

Radio power mode = OFF, Reason = Out of oper voltage range

Current Band = None, Channel Number = 0

Current RSSI = -110 dBm

Band Selected = Auto

Number of nearby cells = 1

Cell 1

        Primary Scrambling Code = 0xB8

        RSCP = -102 dBm, ECIO = -9 dBm

Relevent config:

Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.2(4)M3

chat-script gsm "" "AT!SCACT=1,1" TIMEOUT 60 "OK"

controller Cellular 0

!!

interface Cellular0

ip address negotiated

no ip redirects

ip virtual-reassembly in

encapsulation slip

dialer in-band

dialer pool-member 2

dialer idle-timeout 0

async mode interactive

!

interface Dialer2

ip address negotiated

ip virtual-reassembly in

encapsulation ppp

dialer pool 2

dialer idle-timeout 0

dialer string gsm

dialer persistent

dialer-group 2

ppp chap hostname USERNAME

ppp chap password 7 PASS

ppp ipcp dns request

Everyone's tags (1)
1 REPLY
New Member

887 VAG losing power to Cell radio

I've discovered that test cellular 0 modem-power-cycle also brings it back online


521
Views
0
Helpful
1
Replies