Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

887va Resets after switch off

Hi All,

We have to switch of our Cisco 887va router over the weekend, when we come back on the Monday to switch it back on the router has reset itself or not holding the current configuration. We have to re-input the configuration each time! any help would be much appreciated.

Many Thanks.

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: 887va Resets after switch off

The first question to ask is why you switch off your router ...

Back to your question:

1) Did you save the config? ("write mem" or "copy run start") after doing your configuration?

2) Is the config-register set correctly?

cisco#sh ver | i register

Configuration register is 0x2102

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
3 REPLIES
VIP Purple

Re: 887va Resets after switch off

The first question to ask is why you switch off your router ...

Back to your question:

1) Did you save the config? ("write mem" or "copy run start") after doing your configuration?

2) Is the config-register set correctly?

cisco#sh ver | i register

Configuration register is 0x2102

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
New Member

Re: 887va Resets after switch off

Thanks for your answer Karsten.iwen,

I've done the:

Router#copy running-config startup-config

Hopefully that will work, the company gets powered down at the weekend, to save on power.

Many thanks for your help.

VIP Purple

887va Resets after switch off

remember that you have to save the config after every change to make that change permanent.

-- 
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni


--
Don't stop after you've improved your network! Improve the world by lending money to the working poor: http://www.kiva.org/invitedby/karsteni
125
Views
0
Helpful
3
Replies
CreatePlease login to create content