Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

887va with public ip

Dears;

I have 887va router that act as adsl modem and it working fine . I have one static public ip but iI dont know where to use it (under which interface)

I tried to use

r(config)#interface dialer1

r(config)#ip address x.x.x.x(the public ip)

instead of

r(config)#interface dialer1

r(config)#ip address negotiated

but doesn't work

10 REPLIES
New Member

887va with public ip

Do you establish PPPoE ?

New Member

887va with public ip

yes with the command of

r(config)#interface dialer1

r(config)#ip address negotiated

887va with public ip

In some releases you cant assign /32 address under dialer interfaces.

so you have options

either use

ip address negotiated

or

int lo100

ip address x.x.x.x 255.255.255.255

int dia1

ip unnumbered lo100

HTH

Hitesh

pls rate useful posts

New Member

887va with public ip

Dear Hitesh Vinzoda

the internet connection become down and  I cant telnet to the router from outside

I need this public ip to be used for site to site vpn with remote peer(any other solution will be appreciated)

thanks

Mahmoud

Re:887va with public ip

What option have you used?

Have you tried restarting router?


Sent from Cisco Technical Support Android App

New Member

887va with public ip

My problem is I have two sites and want to make site to site vpn between them

(site A)  887va router and public ip

(site B)  ASA 5505 with public ip

I faced a problem related to 887va when I configured the ASA firewall for vpn I should use the 887va public IP

but I cant put this public ip under interface dialer in 887va (cisco documentaion said that). I dont care to use this public IP under dialer interface ,only I care about using this public ip  in vpn and access the router from outside by telnet .

any help please

Re:887va with public ip

Hi you would need to use IP address negotiated under dialer interface. Pls check with provider if they are pushing address via radius or LNS pool.


Sent from Cisco Technical Support Android App

New Member

887va with public ip

thanks Hitesh Vinzoda for your replay I appreciate that

I'm already using

r(config)#interface dialer1

r(config)#ip address negotiated

the internernet is working fine but my question is in ASA what IP should I use for peer (887va router) if i make the the ip negotiated?

887va with public ip

Please logon to the router and if your provider has given you a static IP then you can find that out using

> show ip int brief

Now if at all you dont know the IP address then from a PC behind the router go to www.whatismyipaddress.com

This will show you the external IP of the router. If all your other configuration on the router is OK.

Thanks

Hitesh

New Member

887va with public ip

I know that thanks

the dialer interface got public ip by negotiating but this ip is differnt from my assigned public ip from isp

is this ip will change after while?

can i use this negotiated ip in vpn ?

if i use anther public ip as a secondary under int vlan 1 any problem gonna be happen ?

430
Views
0
Helpful
10
Replies
CreatePlease login to create content