cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1154
Views
0
Helpful
3
Replies

A question for the experts.

TIMOTHY BRYANT
Level 1
Level 1

Just wondering if anyone has seen this and what their thoughts are WiSM blade is in port one of my 6509:

Firmware compiled 03-Jun-11 12:45 by integ Build [100]
Oct 19 21:35:22.443: %SYS-CFC1-5-RESTART: System restarted --
Cisco IOS Software, c6lc2 Software (c6lc2-SP-M), Version 12.2(33)SXJ1, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 22-Jun-11 18:02 by prod_rel_team
Oct 19 21:35:22.451: CFC1: Currently running ROMMON from S (Gold) region
*Oct 19 21:35:23.003: %OIR-SP-6-INSCARD: Card inserted in slot 8, interfaces are now online
*Oct 19 21:35:25.040: %DIAG-SP-6-RUN_MINIMUM: Module 1: Running Minimal Diagnostics...
*Oct 19 21:35:35.499: %MLS_RATE-4-DISABLING: The global switching mode is now 'truncated'. Disabling the Layer2 Rate Limiters.
*Oct 19 21:35:34.954: %DIAG-SP-6-DIAG_OK: Module 4: Passed Online Diagnostics
*Oct 19 21:35:38.145: %OIR-SP-6-INSCARD: Card inserted in slot 4, interfaces are now online
*Oct 19 21:35:39.952: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics
*Oct 19 21:35:40.476: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online
*Oct 19 21:35:41.064: %EC-SP-5-CANNOT_BUNDLE2: Gi1/1 is not compatible with Po401 and will be suspended (trunk mode of Gi1/1 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.064: %EC-SP-5-CANNOT_BUNDLE2: Gi1/2 is not compatible with Po401 and will be suspended (trunk mode of Gi1/2 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.068: %EC-SP-5-CANNOT_BUNDLE2: Gi1/3 is not compatible with Po401 and will be suspended (trunk mode of Gi1/3 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.068: %EC-SP-5-CANNOT_BUNDLE2: Gi1/4 is not compatible with Po401 and will be suspended (trunk mode of Gi1/4 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.068: %EC-SP-5-CANNOT_BUNDLE2: Gi1/5 is not compatible with Po402 and will be suspended (trunk mode of Gi1/5 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.072: %EC-SP-5-CANNOT_BUNDLE2: Gi1/6 is not compatible with Po402 and will be suspended (trunk mode of Gi1/6 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.072: %EC-SP-5-CANNOT_BUNDLE2: Gi1/7 is not compatible with Po402 and will be suspended (trunk mode of Gi1/7 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.076: %EC-SP-5-CANNOT_BUNDLE2: Gi1/8 is not compatible with Po402 and will be suspended (trunk mode of Gi1/8 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.392: %EC-SP-5-CANNOT_BUNDLE2: Gi1/1 is not compatible with Po401 and will be suspended (trunk mode of Gi1/1 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.392: %EC-SP-5-CANNOT_BUNDLE2: Gi1/2 is not compatible with Po401 and will be suspended (trunk mode of Gi1/2 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.392: %EC-SP-5-CANNOT_BUNDLE2: Gi1/3 is not compatible with Po401 and will be suspended (trunk mode of Gi1/3 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.392: %EC-SP-5-CANNOT_BUNDLE2: Gi1/4 is not compatible with Po401 and will be suspended (trunk mode of Gi1/4 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.396: %EC-SP-5-CANNOT_BUNDLE2: Gi1/5 is not compatible with Po402 and will be suspended (trunk mode of Gi1/5 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.396: %EC-SP-5-CANNOT_BUNDLE2: Gi1/6 is not compatible with Po402 and will be suspended (trunk mode of Gi1/6 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.396: %EC-SP-5-CANNOT_BUNDLE2: Gi1/7 is not compatible with Po402 and will be suspended (trunk mode of Gi1/7 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.396: %EC-SP-5-CANNOT_BUNDLE2: Gi1/8 is not compatible with Po402 and will be suspended (trunk mode of Gi1/8 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.744: %EC-SP-5-CANNOT_BUNDLE2: Gi1/2 is not compatible with Po401 and will be suspended (trunk mode of Gi1/2 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.744: %EC-SP-5-CANNOT_BUNDLE2: Gi1/3 is not compatible with Po401 and will be suspended (trunk mode of Gi1/3 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.744: %EC-SP-5-CANNOT_BUNDLE2: Gi1/4 is not compatible with Po401 and will be suspended (trunk mode of Gi1/4 is dynamic, Po401 is trunk)
*Oct 19 21:35:41.752: %EC-SP-5-CANNOT_BUNDLE2: Gi1/6 is not compatible with Po402 and will be suspended (trunk mode of Gi1/6 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.752: %EC-SP-5-CANNOT_BUNDLE2: Gi1/7 is not compatible with Po402 and will be suspended (trunk mode of Gi1/7 is dynamic, Po402 is trunk)
*Oct 19 21:35:41.752: %EC-SP-5-CANNOT_BUNDLE2: Gi1/8 is not compatible with Po402 and will be suspended (trunk mode of Gi1/8 is dynamic, Po402 is trunk)
*Oct 19 21:35:42.128: %EC-SP-5-CANNOT_BUNDLE2: Gi1/3 is not compatible with Po401 and will be suspended (trunk mode of Gi1/3 is dynamic, Po401 is trunk)
*Oct 19 21:35:42.128: %EC-SP-5-CANNOT_BUNDLE2: Gi1/4 is not compatible with Po401 and will be suspended (trunk mode of Gi1/4 is dynamic, Po401 is trunk)
*Oct 19 21:35:42.132: %EC-SP-5-CANNOT_BUNDLE2: Gi1/7 is not compatible with Po402 and will be suspended (trunk mode of Gi1/7 is dynamic, Po402 is trunk)
*Oct 19 21:35:42.132: %EC-SP-5-CANNOT_BUNDLE2: Gi1/8 is not compatible with Po402 and will be suspended (trunk mode of Gi1/8 is dynamic, Po402 is trunk)
3 Replies 3

Hi Timothy,

Can you share ether-channel and member port config please.

Also, I assume for ether-channel is L2 right ???

I suspected, hard coding the port to trunk instead of auto negotiation should solve the problem.

However, still needs to see the config before suggesting something concrete.

HTH,

Smitesh

Leo Laohoo
Hall of Fame
Hall of Fame

Interfaces Gig 1/1 to 8 is configured with "switchport trunk desirable" while the Portchannel interface 401 and 402 is configured as "switchport mode trunk".

Here's how you fix this one up:

1.  no interface po 401;

2.  no interface po 402;

3.   interface range g 1/1 - 4

4.  switchport mode trunk

5.  channel-group 401 mode on

5.   interface range g 1/5 - 8

6.  switchport mode trunk

7.  channel-group 402 mode on

wififofum
Level 4
Level 4

Similar to Leo's reply, but I couldn't remove the Port-Channels when I had the issue.  Probably code-dependent interaction with Auto-LAG. I solved this issue by removing and re-applying the VLANs: no wism module slot controller <1/2> allowed-vlan xx,yy,zz wism module slot controller <1/2> allowed-vlan xx,yy,zz

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: