06-22-2009 06:30 AM - edited 03-04-2019 05:12 AM
Hi, i'm configuring a 7201 with IOS 12.4.24T and i can't do the router report the frame ip addr or the nas port to the radius server in a debian dist. tks
06-22-2009 08:59 PM
Please, provide more informatin on this.
Thanks
06-23-2009 04:05 AM
In the radius server i receive this:
Mon Jun 22 13:06:28 2009
Acct-Session-Id = "0000483A"
Framed-Protocol = PPP
User-Name = "alem"
Acct-Authentic = RADIUS
Acct-Status-Type = Start
NAS-Port-Type = Virtual
NAS-Port = 0
NAS-Port-Id = "0/0/1/202"
Service-Type = Framed-User
NAS-IP-Address = 200.50.248.77
Acct-Delay-Time = 0
Client-IP-Address = 200.50.248.77
Acct-Unique-Session-Id = "e9db7d58938672d9"
Timestamp = 1245686788
instead of (for example):
Tue Jun 23 00:00:00 2009
User-Name = "omarperez"
NAS-Port = 4397
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 200.50.250.233
Filter-Id = "0@0"
NAS-Identifier = "bas.cotecal.com.ar"
Acct-Status-Type = Alive
Acct-Delay-Time = 0
Acct-Input-Octets = 10521
Acct-Output-Octets = 476683
Acct-Session-Id = "bas.cot0906221313384a88ef8701572"
Acct-Authentic = RADIUS
Acct-Session-Time = 38699
Acct-Input-Packets = 205378
Acct-Output-Packets = 337327
Acct-Input-Gigawords = 0
Acct-Output-Gigawords = 0
Event-Timestamp = "Jun 22 2009"
NAS-Port-Type = Ethernet
Calling-Station-Id = "00:06:4f:56:42:f5"
NAS-Port-Id = "slot=0;subslot=0;port=1;vlanid=301"
Attr-131792956 = 0x3230302e35302e3235302e3233332030303a30363a34663a35363a34323a6635
Attr-131792897 = 0x03200000
Attr-131792898 = 0x00a00000
Attr-131792900 = 0x03200000
Attr-131792901 = 0x00a00000
Attr-131792918 = 0x00000000
Attr-131792922 = 0x00000624
NAS-IP-Address = 200.50.248.74
Client-IP-Address = 200.50.248.74
Acct-Unique-Session-Id = "f09cfb4c221cb16f"
Timestamp = 1245726000
Thanks
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: