I have 6513& 4506 switches in our data center, 6513 is newly deployed switch. we have configured trunk between these two switches and moved all the servers from 4506 to 6513. We have moved our critical servers from 4506 to 6513 and I have created access-list to block icmp in 4506 (IN & OUT on L2 ports) working fine.
When we create semilar access-list and applied on the switch port its not accepting access-list OUT. I have raised TAC and TAC team told that 6513 does not support OUT access-list on switch ports.
I need to implemnet this and would like to know any other method to achive this.Kindly suggest me is there any way to achive this.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...