Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Access server

I have a 2507 router with 16 port hubs, and my question is if I have five routers is there away to connect the five router console ports to the 2507 and be able to connect to each from the 2507 router. I thought this was possible and if so how do I setup the 2507 to allow this. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Access server

Can you send the output of sh diag from the router

Narayan

4 REPLIES

Re: Access server

Friend,

If you are having Async Port adapter, 16 ports

then you can configure something like this

ip host router1 2001 172.16.102.25

ip host router2 2002 172.16.102.25

ip host router3 2003 172.16.102.25

ip host router4 2004 172.16.102.25

ip host router5 2005 172.16.102.25

int fa 0/0

ip address 172.16.102.25 255.255.255.0

you can log on to the 2507 and then use the hostnames to get the respective consoles

HTH, rate if it does

Narayan

New Member

Re: Access server

I don't understand completely and can you tell me if I have 16 ports Hubs I go into port or hub 1 and do what to assign this hub/port to the router one console and so on and so forth?

I need step-by-step because I'm very green like the grass we see outside, for now but learning every day. Thanks again

Re: Access server

Can you send the output of sh diag from the router

Narayan

New Member

Re: Access server

Hi Narayan

the router and lab are at another location and with no remote access.

139
Views
0
Helpful
4
Replies
CreatePlease login to create content