cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
614
Views
0
Helpful
2
Replies

Accessing file shares behind router using NAT

JOSE TORRES
Level 1
Level 1

I am trying to access a file share behind a router where I am using NAT.

I have created a static 1 to 1 translation for the outside to the inside address so all other traffic like RDP (Terminal Services) works fine but I cannot get a file share like \\172.16.1.3\share to connect from the outside to the inside.

Any tips or assistance would be greatly appreciated.

Thank You,

BTW I am using an 806 with 12.2 code, not sure if the router capabilities would be an issue.

Cisco Internetwork Operating System Software

IOS (tm) C806 Software (C806-OY6-M), Version 12.2(2)XK2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Sat 16-Feb-02 16:25 by ealyon

Image text-base: 0x80013170, data-base: 0x8053CFD0

ROM: System Bootstrap, Version 12.2(1r)XE2, RELEASE SOFTWARE (fc1)

ROM: C806 Software (C806-OY6-M), Version 12.2(2)XK2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

Router uptime is 1 hour, 57 minutes

System returned to ROM by reload

System image file is "flash:c806-oy6-mz.122-2.XK2.bin"

CISCO C806 (MPC855T) processor (revision 0x301) with 30720K/2048K bytes of memory.

Processor board ID JAD060406VQ (197933467), with hardware revision 0000

CPU rev number 5

Bridging software.

2 Ethernet/IEEE 802.3 interface(s)

128K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

2048K bytes of processor board Web flash (Read/Write)

Configuration register is 0x2102

2 Replies 2

bstremp
Level 2
Level 2

jitesh1982
Level 1
Level 1

Hi joes .

u r translating network address. private to private or private to public .

if ur translating pvt to public

after doing static nat. connect using public ip from outside .or just try to telnet that outside ip address from outside using rdp port . port number 3389

for example if ur outside ip is a.b.c.d then

telnet a.b.c.d 3389 . from outside ,try this and let me know

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: