Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Acess-lists ports alphabetical representation

Hi! I have cat6500 under control and when i'm adding ACL in global config for example:

access-list 111 permit udp any 10.0.254.0 0.0.0.255 eq 53
access-list 111 permit udp any host 255.255.255.255 eq 67
access-list 111 permit udp any 10.0.254.0 0.0.0.255 eq 123
access-list 111 permit tcp any host 10.0.254.9 eq 80

In the output of show access-list device shows me alphabetical representation of port i.e.

10 permit udp any 10.0.254.0 0.0.0.255 eq domain
20 permit udp any host 255.255.255.255 eq bootps
30 permit udp any 10.0.254.0 0.0.0.255 eq ntp
40 permit tcp any host 10.0.254.9 eq www

Can anyone answer me how to tell switch to aviod such substitution and use just port numbers which i assigned?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Acess-lists ports alphabetical representation

afaik, you cannot

1 REPLY
New Member

Re: Acess-lists ports alphabetical representation

afaik, you cannot

164
Views
0
Helpful
1
Replies