10-26-2009 08:05 AM - edited 03-04-2019 06:30 AM
I would like to logging the ACL on Cisco 2960G switch. I created an extended ACL and I added the next line from the aim of testing (deny ip any any log). It is good working but it doesn't logging.
I configured 'logging on ; logging buffer etc...'.
Is it possible the ACL logging in switch or not?
If it isn't possible, then How can i logging incoming package information in switch.?
Data sheet:
IOS version 12.2(25)SEE2
Cisco Catalyst 2960G
Thank you for the help to everybody.
Solved! Go to Solution.
10-26-2009 08:47 AM
Hello.
Please see this link:
It does not support ACL logging.
I think your best bet would be to mirror traffic to a sniffer and your sniffer can keep track of incoming traffic.
Simon
10-26-2009 08:47 AM
Hello.
Please see this link:
It does not support ACL logging.
I think your best bet would be to mirror traffic to a sniffer and your sniffer can keep track of incoming traffic.
Simon
10-27-2009 01:03 AM
Hy, Simon
Thank you for your help.
I understand it by now.
Bozsik Janos
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: