ACL logs

[Ibrahim Jamil]

Hi Experts

i have an ACL 150 applied to Gi0/0 inbound direction,  with a log keyword on the deny line,now how can i see  the effects of this ACL,i mean the src address being blocked by acl

thanks

jamil

[John Blakley]

Jamil,

It will either log to your buffer or wherever you're sending your logs (if you're using a syslog server). You can do a show log to see the results usually.

HTH,

John

[Ibrahim Jamil]

Hi John

thanks for ur reply

i dont have a syslog server!

Can we go further, i need to debud this ACL ?

jamil

[John Blakley]

Try just "show log" on the router.

[Vasileios Bouloukos MSc, ITIL, CCIE]

Hi Ibrahim,

You should have activated the logging to the buffered. In addition, you should configure the log to  debugging severity level if you need to also log the debug outputs.

Finally, I would recommned to increase the buffer size to a higher value than the default (4096) in order to avoid overwriting the logs

logging buffered [buffer-size| level]

level=7 debugging

Hope that helps,

Vasilis