Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

acl on line vty

Hi

i experienced strange behabior.

i could'nt do telnet at all with extended acl but ok with standard acl.

username cisco password cisco

access-list 101 permit tcp 150.1.1.0 0.0.0.255 any eq telnet

line vty 0 4

login local

access-class 101

username cisco password cisco

access-list 10 permit 150.1.1.0 0.0.0.255

line vty 0 4

login local

access-class 10

any idea?

thanks

1 REPLY
Silver

Re: acl on line vty

i don't find anything wrong in the given configuration. it should work. If not, could u send full config so that we could see, whether it is due some other CLI or not.

I hope u use "access-class 101 in" only.

214
Views
0
Helpful
1
Replies