hi...I have 2 different network VLAN1 (10.74.1.x) and VLAN2 (10.20.1.x). the network printer is located at VLAN1. my question is can VLAN2 print using printer @ VLAN1? do i have to configure ACL? if so. how? tq
Why 2 ACLs on both SVIs ? if you apply only one ACL on one SVI it will work as the implicit deny will drop all other traffic including return traffic going to the other SVI. What do you think about it?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...