Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

active / active bgp setup (inbound/outbound)

hello expert,

   im in the brink of reconfiguring my BGP active/standby network to BGP active/active - inbound/outbound;

   Existing:

   Host               --------single router -------------- link to ISP1  (active)

                                                   --------------- link to ISP2 (standby)

   Proposed:

   Host    -------------- single router ------------ link to ISP1 (active)

                                               -------------link to ISP2 (active)


Both ISP's will be running on BGP active/active thus my network won't care if ISP1 or ISP2 is down since BGP will reroute all traffic

to whoever is active.

Do you have a sample configuration for this ?

tia,

agl

1296
Views
0
Helpful
0
Replies
CreatePlease to create content