Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Add a stack switch

I have 2 switches connected via Stack Cables. The first switch is running c3750-ipbasek9-mz.122-35.SE5.bin. The second is not running an IOS other than the bootloader. Can I automatically upgrade the second switch from the first?

2 REPLIES

Re: Add a stack switch

By default it tries to upgrade automatically, but mine didn't work. I just did this over the weekend, but what I ended up having to do was copy from the first switch to my sixth after deleting the IOS on the sixth switch:

del flash6:/name.of.bin

copy flash1:/name.of.bin flash6:

I then reloaded the 6th switch:

reload slot 6

It came up fine without the "VERSION MISMATCH"

HTH,

John

HTH, John *** Please rate all useful posts ***
New Member

Re: Add a stack switch

I thought it automatically upgraded. I think what happened is that I power cycled the 2nd switch while it was in the middle upgrading. I have an "Upgrade" folder on the 2nd switch now. When I try to boot to the .bin file contained in the folder, it gives me an error. I will delete the .bin file, reboot, and start over.

Unfortunately, I work at a hospital and will have to do this late tonight.

110
Views
0
Helpful
2
Replies