cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1842
Views
0
Helpful
3
Replies

Addition of Vlans on TRUNK on Nexus 7000

Rupesh Kashyap
Level 1
Level 1

Hi, I have two Nexus 7000 named as Core-1 and Core-2. Both are connected with Po-1. I have allowed many vlans on trunk.

Now I want to add three new vlan 401,402 & 403. My question is my command would be

switchport trunk allowed vlan add 888-889,900,998,401,402,403 or switchport trunk allowed vlan add 401,402,403.

Please confirm so that all vlans should not removed by my mistake.

interface port-channel1
  description DDC-ED2 Po1 - L2/TRUNK (vPC Peer Link)
  switchport
  switchport mode trunk
  switchport trunk native vlan 998
  switchport trunk allowed vlan 64-126,300-301,303,332-333,667-670
  switchport trunk allowed vlan add 888-889,900,998
  vpc peer-link
  spanning-tree port type network

3 Replies 3

aditya5846
Level 1
Level 1

use the command switchport trunk allowed vlan add 401,402,403.

aditya5846
Level 1
Level 1

switchport trunk allowed vlan add 401,402,403.because u r going to add new VLAN

thanks man.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: