Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Additional FE port for 2801

Hi,

Can someone advise me on which additional module I should purchase to have additional FE ports on top of the 2 ports that comes with the 2801 router. Thanks!

Dan

2 REPLIES

Re: Additional FE port for 2801

VIP Purple

Re: Additional FE port for 2801

Hello Dan,

in addition to Sankar´s post, and that is how I understand it, the HWIC-4ESW does not automatically give you 4 additional Layer 3 routable 10/100 interfaces. For the HWIC to work, you need to configure inter-VLAN routing on the 2801. You might want to have a look at the configuration guide below:

Cisco HWIC-4ESW and HWIC-D-9ESW EtherSwitch Interface Cards

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804554c7.html

Regards,

GP

91
Views
0
Helpful
2
Replies