Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

address-family vpnv4 not available

Hello Members,

i trying to configure a BGP address family for a vpn.

this is the config i want to configure:

router bgp 100
bgp log-neighbor-changes
neighbor 172.17.0.6 remote-as 100
neighbor 172.17.0.6 update-source GigabitEthernet0/0.100
!
address-family ipv4
  no synchronization
  neighbor 172.17.0.6 activate
  no auto-summary
  no synchronization
exit-address-family
!
address-family vpnv4
neighbor 172.17.0.6 activate
neighbor 172.17.0.6 send-community both
exit-address-family

but i cannot enter the address-family vpn4 command.

i use this router:

show version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M3, REL                                                                                                 EASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sun 18-Jul-10 03:32 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)

NOS_CH_WBN_CE01 uptime is 6 minutes
System returned to ROM by reload at 20:58:42 cet Mon Nov 22 2010
System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M3.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

Technology Package License Information for Module:'c2900'

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      securityk9    Permanent     securityk9

any ideas?

thanks in advanced

alex

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: address-family vpnv4 not available

Hello Alex,

>> ipbase        ipbasek9      Permanent     ipbasek9

security      securityk9    Permanent     securityk9

any ideas?

I would say a license issue: you have IP base license and you likely need an advanced IP service license

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps5460/product_bulletin_c25-557278.html

the right term in 15.0 is a Data license over IP Base see figure 4 in above document

Hope to help

Giuseppe

2 REPLIES
Hall of Fame Super Silver

Re: address-family vpnv4 not available

Hello Alex,

>> ipbase        ipbasek9      Permanent     ipbasek9

security      securityk9    Permanent     securityk9

any ideas?

I would say a license issue: you have IP base license and you likely need an advanced IP service license

http://www.cisco.com/en/US/prod/collateral/iosswrel/ps8802/ps5460/product_bulletin_c25-557278.html

the right term in 15.0 is a Data license over IP Base see figure 4 in above document

Hope to help

Giuseppe

New Member

Re: address-family vpnv4 not available

Hello Guiseppe,

hostenly this is not the answer which makes me happy.

but thank you.

regards

alex

773
Views
0
Helpful
2
Replies