In a ethernet framework the Address Resolution Protocol(ARP) does the address learning that is associating ip address with mac address, I studied the HDLC protocol which is used as layer 2 protocol in serial links and found that there is a 8 bit address field.
Does HDLC protocol learn the remote end HDLC address in point to point links or is it only used in point-to-multipoint scenario?
How can we see this HDLC address in cisco routers as we can see the mac address associated with ethernet by show ip arp command?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...