I have a customer who has 2 sites which are 5 KM apart. He has only a plain telephone copper wire between these 2 office. He doesnot have any other media.
He wants to connect these 2 offices via telephone wire. Can we use an ADSL router to achieve it. We will set up to ADSL routers on each side and then have LAN switch connected to the routers to have the LAN to lan connectivity to other building. is it possible ?
I could be wrong but I think you would need some sort of DSLAM on the one side and then the DSL router on the other. Is this a dry pair meaning you own it end to end and it has no voice services on it.
At my old job, we did this by using a DSLAM at the central data center and a modem at the remote office but owned everything between the central location and remote office about 5km away.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...