Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Advanced NAT help needed (VERY Complicated - need NAT GURU)

I have VPN spoke routers that have split tunneling enabled. I need static nat and overload for three different VLAN's. The statics NAT's

need to access Internet and corporate network thru IPSEC tunnel. The DHCP pool addresses need to 1)Access a Websense server on corporate

network thru IPSEC tunnel and 2)Access internet via an NAT overload

Here is what I need to now accomplish. I need to allow VLAN 2 to get to Websense server and to internet and the same for VLAN3. VLAN 1 works

perfectly.

Any NAT guru's out there see an answer? My Brain is burnt.

Please see attachment.

1 REPLY
New Member

Re: Advanced NAT help needed (VERY Complicated - need NAT GURU)

In that case route map could be configured to use this type of access.Refer URL for more info

http://cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml#h1toh2.

622
Views
0
Helpful
1
Replies