Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

after Release upgrade cannot start web interface on the Catalyst

hi

I've done a Release upgrade from 12.1(12c)EA1 to 12.1.22-EA6 on the Catalyst WS-C3550-12T

now I cannot start a web interface and get following error:

404 Not Found

The requested URL /homepage.htm was not found on this server.

4 REPLIES
Bronze

Re: after Release upgrade cannot start web interface on the Cata

How did you do the upgrade?

1) copy tftp flash

Or

2) archive download-sw ......

In short, was it a .bin or a .tar file?

If it was the .bin file you don't get the web interface with.

See more here:

http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_example09186a0080169623.shtml#concept10

New Member

Re: after Release upgrade cannot start web interface on the Cata

it was a .bin file

and I did the upgrade with:

# copy tftp flash:

Bronze

Re: after Release upgrade cannot start web interface on the Cata

Well there is you problem, the .bin file doesn't include the CMS files.

So download the .tar insted, and follow the procedure from the link I just posted.

Good luck.

New Member

Re: after Release upgrade cannot start web interface on the Cata

thanks !

1026
Views
5
Helpful
4
Replies