I have a 3825 router that currently has an AIM-ATM module and 2 VWIC-2MFT-T1 cards with 4 T1's connected in an IMA group. We want to install 2 more T1's to the group. Will I be able to do this if I install a second AIM-ATM and another VWIC-2MFT-T1? In otherwords, will an IMA circuit multiplex across 2 AIM-ATM cards in a 3825 router?
The AIM-ATM module can handle a maximum of 4 T1 ports (2 VWIC-2MFT-T1 cards)A second AIM-ATM module cannot be used to multiplex a 6 port IMA group. With a second AIM-ATM you can create a second IMA group (also up to 4 T1's controlled)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...