Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Aironet 3600e configuration

Hello folks,

Does anyone know how I can configure the Aironet 3600e by Cisco without a WAN Controller. I know it's a controller based AP but I bought it in preparation for my new WiFi Network Design as I'm planning to deploy these APs together with a controller but at this stage all I need is just basic config so that I can see how good it will work in the environment I want to implement it. So I was wondering if there is some kind of default IP and Admin/ Password as I could not find the info on Cisco's website.

Thanks!

Sent from Cisco Technical Support iPhone App

4 REPLIES
Hall of Fame Super Gold

Aironet 3600e configuration

Currently, the 3600 does not and cannot operate in autonomous mode.

A WLC (running at least 7.2.103.0) is required.

New Member

Re: Aironet 3600e configuration

Snap!!!!!!!! I don't know what to do now cause I wouldn't prefer to get the controller before I figure out how things work with this AP; The WLC is a big investment so I was hoping there would be a way to configure the AP without the controller just for testing.  

Hall of Fame Super Gold

Aironet 3600e configuration

How "friendly" are you with your Cisco account manager/sales engineer?

I'm not talking about your authorized Cisco reseller.

Talk to Cisco and ask to borrow an evaluation WLC5508 or 2504. 

New Member

Aironet 3600e configuration

Hey leolaohoo,

I contacted Cisco about this issue and I was told that in order to get TAC  technical support and troubleshooting or to get assistance configuring  my device, I would need to purchase a SmartNet contract.

I don't know any Cisco account manager or engineer...

I didn't know borrowing was possible. What's the procedure?


I appreciate your help.

975
Views
0
Helpful
4
Replies
CreatePlease to create content