I configured the nm-card for data transmision, but it doesn?t work. it send alarm and do not enable the connections.
this de configurration instructions:
card type e1 1 1
controller E1 1/0
framing NO-CRC4
channel-group 1 timeslots 1-16 speed 64
channel-group 2 timeslots 18-21 speed 64
channel-group 3 timeslots 22-23 speed 64
channel-group 4 timeslots 24-27 speed 64
interface Serial1/0:1
ip address 192.1.5.1 255.255.255.0
!
interface Serial1/0:2
ip address 172.1.1.9 255.255.255.248
!
interface Serial1/0:3
ip address 172.1.1.17 255.255.255.248
!
interface Serial1/0:4
ip address 172.1.1.25 255.255.255.248
thank you for any help