Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Alarm on NM-HDV2-1T1/E1

I configured the nm-card for data transmision, but it doesn?t work. it send alarm and do not enable the connections.

this de configurration instructions:

card type e1 1 1

controller E1 1/0

framing NO-CRC4

channel-group 1 timeslots 1-16 speed 64

channel-group 2 timeslots 18-21 speed 64

channel-group 3 timeslots 22-23 speed 64

channel-group 4 timeslots 24-27 speed 64

interface Serial1/0:1

ip address 192.1.5.1 255.255.255.0

!

interface Serial1/0:2

ip address 172.1.1.9 255.255.255.248

!

interface Serial1/0:3

ip address 172.1.1.17 255.255.255.248

!

interface Serial1/0:4

ip address 172.1.1.25 255.255.255.248

thank you for any help

1 REPLY
Bronze

Re: Alarm on NM-HDV2-1T1/E1

For the NM-HDV2-1T1/E1 to work we need to have clock source linecode,cable length configured.Refer the URL for more info

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00801ea415.html#wp1060298

114
Views
0
Helpful
1
Replies