Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Annex M issue with 527W

Hello CISCO Forum

I have a client who is attempting to setup a CISCO 527W to connect via Annex M mode who is having some issues

Latest firmware has been used and Annex M mode selected in setup interface yet the the modem refuses to get ADSL sync in Annex M mode and fails back to Annex A.

A different ADSL Modem/Router (Billion) has been tested on the line and it connects in Annex M mode with no problems so it does not appear to be an issue with ISP

Any Ideas as to how to resolve this issue or could it be a fault with the CISCO hardware ?

3 REPLIES
Hall of Fame Super Gold

Re: Annex M issue with 527W

[edited, as I was providing wrong information previosly]

Annex M is supporte with software 1.01.11

http://www.cisco.com/en/US/docs/routers/srp520_series/srp521w/release_notes/srp520_rn_OL-20673-04.pdf

New Member

Re: Annex M issue with 527W

I have already updated to this firmware (1.01.11) and still have issue , any other ideas ?

Hall of Fame Super Gold

Re: Annex M issue with 527W

Contact Cisco TAC and complain to them.

Note you will need to provide connected DSLAM maker and version, to allow engioneers to check tested matrix.

291
Views
0
Helpful
3
Replies
CreatePlease login to create content