Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Any command to see the 'BGP Synchronization' status on Cisco rtr..?

Hi All,

I have a 1720 rtr with IOS: 12.1(6)

It has EBGP peering with ISP rtr. No IBGP on the rtr.

***********************

BGP config:

router bgp 1111

bgp log-neighbor-changes

network 20.30.62.0 mask 255.255.255.0

network 15.5.104.0 mask 255.255.255.224

neighbor 23.23.3.17 remote-as 2222

neighbor 23.23.3.17 next-hop-self

neighbor 23.23.3.17 soft-econfiguration inbound

neighbor 23.23.3.17 route-map test out

****************************

How do I know, if BGP synchronization is enabled/desabled on this rtr. Is there any command whose o/p shows that..?

Thank you in advance

MS

  • WAN Routing and Switching
2 REPLIES

Re: Any command to see the 'BGP Synchronization' status on Cisco

If I'm not mistaken, if you don't see "no syncronization" in the BGP config, syncronization is ON.

Paul

Re: Any command to see the 'BGP Synchronization' status on Cisco

Hi MS,

BGP synchronization is off by default in Cisco IOS release 12.2(8)T and later.

If you don't see the "no synchronization" in the "show running-config" output, this means synchronization is set to the default value, which is "on" in your version of IOS, that is : enabled.

Cheers:

Istvan

140
Views
5
Helpful
2
Replies
This widget could not be displayed.