cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
287
Views
5
Helpful
2
Replies

*Aplication of Route-map

z.zajac
Level 1
Level 1

Hello members :)

Strange thing. see:

I wanted to route internet traffic from branch through dedicate router behind HQ router. For this reason I tried to implement route-map on HQ router's incomming serial interface, with ACL matching source adress of branch.

branch ----->serial 4/0:0 HQ router -------> My destination Router

GW.HQ#

!

access-list 75 permit 10.12.5.0 0.0.0.255 //LAN branch

!

route-map Internet-Branch permit 10

match ip address 75

set ip default next-hop 10.50.1.1 //Address of my Destination router. I would like to forward all traffic that matches ACL 75 with NO EXPLICIT ROUTE on HQ to 10.50.1.1

!

!

interface Serial4/0:0

description Liberec ## TR1193 ##

bandwidth 2048

ip address 10.9.5.1 255.255.255.252 //ptp GW.HQ - branch

ip policy route-map Internet-Branch

fair-queue

!

ACL happily match traffic, but the route-map do not work correctly. I fear to use extensive debug on HQ router..

Did anyone see a hole in the scenario?

wish you find the right X-Mass gift without loosing nerves in hypermarkets :)

Zdenek

2 Replies 2

horvaia
Level 1
Level 1

Hi,

Well I think you didn't turn on

"ip route-cache policy" on your incoming

interface (interface serial4/0:0)

Try "ip route-cache policy" command in interface mode.

Andras

Very helpful Horvaia.. I break through HG router now. I am sending you 5 and thanks once more

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: