Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Applying Route-Maps

Am trying to apply a route-map to a vlan interface using the "ip policy route-map" command.

Although I am able to configure this command on the vlan interface, it doesnt actually appear as applied to the interface, when i run "show ip policy"

Can you actually apply a route-map to a VLAN inteface ?

Mark

4 REPLIES

Re: Applying Route-Maps

hi

can you revert with the details about the device in which you are trying the same ?

regds

New Member

Re: Applying Route-Maps

Am configuring a Catalyst 3560 Switch running IOS 12.2.

IP Routing is turned on, and I have a number of vlan interfaces configured on it.

Re: Applying Route-Maps

hi

do make sure whether you are meeting all the prerequisite for having the same configured in your Cisco 3560 Switch..

http://cisco.com/en/US/products/hw/switches/ps5528/products_configuration_guide_chapter09186a008081dac5.html#wp1228588

regds

Re: Applying Route-Maps

Hi,

PBR on 3560 requires sdm template routing "sdm prefer routing", and before all you need IP Services IOS (formerly called the Enhanced Multilayer Image, or EMI).

HTH,

Mohammed Mahmoud.

129
Views
0
Helpful
4
Replies